Visonic POWERMASTER-10 - INSTALLER GUIDE Spécifications télécharger pdf (Page 37)

36 D-302756

Here you determine the number of times the communicator will dial the

Monitoring Station’s number via PSTN.

Select between "2 attempts", "4 attempts", "8 attempts", "12

attempts" and "16 attempts".

Here you determine the number of times the communicator will try to

report via a cellular group (GPRS, GSM and SMS) to the Monitoring

Station.

Select between "2 attempts", "4 attempts", "8 attempts", "12

attempts" and "16 attempts".

Here you determine the number of times the communicator will try to

report via the PowerLink Broadband Module communication to the

Monitoring Station.

10.

11.

Select between "2 attempts", "4 attempts", "8 attempts", "12

attempts" and "16 attempts".

12.

You can now press the button to take you to the "

AUTO TEST

TIME

" menu, or press the button to take you to "

<OK> TO EXIT

4.7.3.7 Configuring the Auto Test Report

Continue below from the previous section or repeat steps 1 to 4 of section 4.7.3.1 before continuing with the

following instructions:

Here you determine the time at which the telephone line will be tested

and reported to the Monitoring Station.

Enter the auto test time.

AUTO TEST TIME

REPORT EVENTS

test time 12:00P

AUTO TEST TIME

LAN RPRT RETRY

4 attempts



GSM RPRT RETRY

PSTN RPRT RETRY

4 attempts



4 attempts



PSTN RPRT RETRY

1 2 ... 32 33 34 35 36 37 38 39 40 41 42 ... 85 86

Commentaires sur ces manuels

Pas de commentaire

Visonic POWERMASTER-10 - INSTALLER GUIDE Spécifications Page 37

Commentaires sur ces manuels

Produits connexes et manuels pour Systèmes de contrôle d'accès de sécurité Visonic POWERMASTER-10 - INSTALLER GUIDE