Visonic POWERMASTER-10 - INSTALLER GUIDE Spécifications télécharger pdf (Page 27)

26 D-302756

Select between "piezo siren ON" and "piezo siren OFF".

You can now press the or button to program any other

menu in "

DEFINE PANEL

" or press the button to take you to "

<OK>

TO EXIT

4.6.3 Configuring the Period of Strobe Light Activation

Here you can define the period of strobe light activation when the siren is in alarm state.

Options: 5 minutes, 10 minutes, 20 minutes (default), 40 minutes and 60 minutes.

To Configure the Period of Strobe Light Activation

Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".

Select between "5 minutes", "10 minutes", "20 minutes", "40

minutes" and "60 minutes".

You can now press the or button to program any other

menu in "

DEFINE PANEL

" or press the button to take you to "

<OK>

TO EXIT

4.6.4 Enabling Siren Activation upon Telephone Line Failure

Here you determine whether the siren will be activated or not when the telephone line fails during system armed

state. Available options are: enable on fail, disable on fail (default).

To Enable Siren Activation upon Telephone Line Failure

Repeat steps 1 to 4 of section 4.2 "Entering the Installer Menu".

27:SIREN ON LINE

01:ENTRY DELAY 1

DEFINE PANEL

40:STROBE TIME

20 minutes



40:STROBE TIME

01:ENTRY DELAY 1

DEFINE PANEL

24:PIEZO SIREN

piezo siren ON



1 2 ... 22 23 24 25 26 27 28 29 30 31 32 ... 85 86

Pas de commentaire

Visonic POWERMASTER-10 - INSTALLER GUIDE Spécifications Page 27