Visonic POWERMASTER-10 - INSTALLER GUIDE Guide de l'utilisateur télécharger pdf (Page 58)

APPENDICES

D-303223 PowerMaster-10/30 G2 User's Guide 57

PowerMaster-10 G2

PowerMaster-30 G2

by GP or equivalent.

4. 9.6V 2200 mAh, rechargeable NiMH battery

pack (special order) or equivalent.

5. 7.2V 1800 mAh, rechargeable NiMH battery

pack, p/n GP180AAH6BMX, manufactured

by GP only.

Caution! Risk of explosion if battery is

replaced by an incorrect type. Dispose of

used batteries according to the

manufacturer's instructions.

Note: For compliance with UL standards the

battery backup period shall exceed 24 hours and

12 hours for compliance with CE standards.

Time to Charge

80 % ( 13 Hrs)

80 % ( 30 Hrs) for all battery types

Optional Backup

Battery Pack

See "Backup Battery Options" above

See "Backup Battery Options" table above

Time to Charge

(optional backup

battery pack)

80 % ( 24 Hrs)

NA

Wired Detectors

Total (Sum)

Current

NA

36* mA max.

Site External Siren

Current (EXT)

NA

450* mA max @ 12.5 VDC when powered by

AC/DC (10.5 VDC when in standby mode)

Site Internal Siren

Current (INT)

NA

450* mA max @ 12.5 VDC when powered by

AC/DC (10.5 VDC when in standby mode)

* Total PowerMaster-30 G2 output current

(of INT & EXT sirens, PGM output and

detectors) cannot exceed 550 mA.

PGM

Current sink to control panel GND 100 mA

max.

Max. external DC voltage +30 VDC

Current sink to control panel GND 100 mA

max.

Max. external DC voltage +15 VDC

High Current /

Short Circuit

Protection

NA

All outputs are protected (automatic reset fuse)

E4. Communication

PowerMaster-10 G2

PowerMaster-30 G2

Communication

PSTN; GSM; GPRS; IP (for future use)

PSTN; GSM; GPRS; IP (for future use)

Built-in Modem

300 baud, Bell 103 protocol

300 baud, Bell 103 protocol

Data Transfer to

Local Computer

Via RS232 serial port

Via RS232 serial port

Report

Destinations

2 Monitoring Stations, 4 private telephones

2 Monitoring Stations, 4 private telephones

Reporting Format

Options

SIA, Contact ID, Scancom, SIA IP, Visonic

PowerNet.

Note: For UL Listed product, the

communication formats used are SIA and

Contact ID.

SIA, Contact ID, Scancom, SIA IP, Visonic

PowerNet.

Note: For UL Listed product, the

communication formats used are SIA and

Contact ID.

Pulse Rate

10, 20, 33 and 40 pps - programmable

10, 20, 33 and 40 pps - programmable

Message to Private

Phones

Tone

Tone or voice

Ring Detection

The unit does not support ring detection without

DC voltage present on the telephone lines.

The unit does not support ring detection without

DC voltage present on the telephone lines

E5. Physical Properties

PowerMaster-10 G2

PowerMaster-30 G2

Operating Temp.

Range

14°F to 120°F (-10°C to 49°C)

Note: For UL Listed product, the ambient

temperature is 32°F to 120°F (0°C to 49°C)

14°F to 120°F (-10°C to 49°C)

Note: For UL Listed product, the ambient

temperature is 32°F to 120°F (0°C to 49°C)

1 2 ... 53 54 55 56 57 58 59 60 61 62

Commentaires sur ces manuels

Pas de commentaire