Visonic AMBER SELECT Guide de l'utilisateur télécharger pdf (Page 9)

Getting Started ______________________________________________________________ 2-1

Chapter 2: Getting Started

2.1 Hardware / Software Requirements

In order to run Amber Basic PC Remote Programmer, you need the following resources:

• PC workstation with Pentium microprocessor (100 MHz or higher)

• Microsoft Windows 2000 or Windows XP.

• 128 megabytes of RAM (minimum)

• Hard disk with at least 8 megabytes of free space.

• For best performance, use a display driver with a resolution of at least 1024 x 768 pixels.

2.2 Installation

Use an RS-232 cable to connect an external modem to one of the computer’s COM ports as

instructed in the manual supplied with the modem. Then connect the modem to the

telephone line.

To Install the Modem

1. Install the modem for use with the remote computer.

2. Restart your computer. In most cases Windows will detect the new hardware and

will open a dialog box prompting you to install the driver for the new modem

(from the manufacturer’s CD).

If Windows does not recognize the modem during startup, do the following:

3. From the Start menu, select Settings

, then Control Panel; the control panel

window appears.

4. Double-click the Modems icon; the Modem Properties dialog box appears.

Note: In Windows XP the Modems icon is located under Printers and other

Hardware.

5. Click Add; the Install New Modem wizard begins. Follow the instructions to

enable Windows detect and install the new modem.

To Install Amber Basic PC Remote Programmer

1. Start Windows. Close all running applications, if any.

2. Insert the Amber Basic PC Remote Programmer CD into the CD-ROM drive.

If your system includes the AutoPlay feature, the setup program starts

automatically. Otherwise, proceed as follows:

1 2 3 4 5 6 7 8 9 10 11 12 13 14 ... 58 59

Pas de commentaire

Visonic AMBER SELECT Guide de l'utilisateur Page 9